|
 |
 |
Overview |
|
|
|
 |
|
The engraving control system is developed based on Googol¡¯s GE-300-SV/SG series PC-based open-architectural motion controllers, especially for 3-axis engraving (engraving and milling) machine control. The high responding and processing speed of the system enables the system to control motor accurately and realize 3D linear and circular interpolation. The system fulfills the fine engraving of complicated graphics by simple operations.
|
|
|
|
 |
 |
Technical Features |
|
|
|
|
|
- In a high-speed DSP core as a control for all-digital servo control, achieving linear, precise circular interpolation
- Analogue of a servo control, processing of high surface finish, smooth operation
- Provide a strong G, M instruction compiler system can support MasterCam, Cimatron, UG, PowerMILL such as a common CAD / CAM software, interface flexibility
- Practical Windows user interface simple, complex graphics precision carving
- High-speed 2D and 3D preview
- Display the machining track in real time
- Provide G code editor. Input or modify a machining file manually
- Provide coordinate processing such as the rotation and mirror of coordinate
- Shortcuts wealth of features that make operation a success
- 500 Prospect of pretreatment (Look ahead), the processing speed of 50 percent, corner smoothing machine small impact
- Embedded processing a variety of strategies so that the users can be processed at the different processing technology for flexible options to improve processing speed and efficiency
- Processing time can be adjusted manually and automatically processing rate
- Rich alarm function, fully embody the human system design
- Arbitrary start of the function, reduce duplication of large processing time and improve processing efficiency
- Arbitrary location of the suspension, arbitrary position to continue to facilitate the operation of the user, reducing the possibility of non-operation
- Provide grammar self-check, error prompt, pause and soft limit and hardware limit functions.
|
| |
|
 |
|
|
 |
| |
|
Control interface |
|
|
System Diagram |
|
|
|
Technical Specifications |
|
|
|
|
|
|
Operation
system
|
Windows
2000 SP2
|
|
Bus
|
PCI
|
|
Sampling
rate
|
200us
(invariable)
|
|
Analog
output Scale
|
-10V -
+10V
|
|
Pulse
output
|
3 axes
|
|
Encoder
channel
|
3 channels of quadrature incremental encoder.
Max. Counting
frequency:
4MHz (GE-300-SX).
|
|
Limit
switch
|
Positive
and negative limit switch of each axis
|
|
Home
switch
|
1
channel of home switch of each axis
|
|
Driver
alarm signal
|
1
channel of driver alarm signal of each axis
|
|
Driver
enable signal
|
1
channel of driver enable signal of each axis
|
|
Driver
reset signal
|
1 channel
of driver reset signal of each axis
|
|
Input
|
16
channels
|
|
Output
|
16
channels
|
|
| |
|
 |
|
|
|
Ordering Guide |
|
|
|
|
|
Selection Guide
|
|
Item
|
Description
|
Engrve-ESG
|
Engrve-ESV
|
|
Machine
tool control axis
|
3Axis
|
Yes
|
Yes
|
|
Spindle
|
1
|
Yes
|
Yes
|
|
Minimum
input increment
|
0.001mm
|
Yes
|
Yes
|
|
Fine
acc/dec control
|
|
Yes
|
Yes
|
|
Software over-travel,
hardware limit switch
protection
|
|
Yes
|
Yes
|
|
Backlash
compensation
|
|
Yes
|
Yes
|
|
Step motor and driver that
can be
connected
|
Step servo driver with
position
control mode
|
Yes
|
Yes
|
|
Servo motor and driver
that
can be connected
|
AC/DC servo driver with
velocity
control mode.
|
No
|
Yes
|
|
Ordering
Information
|
|
Model
No.
|
Description
|
|
Engrve-ESG Control
System
|
-
GE-300-SG-PCI-G
Motion control card
-
Connector with a 60-pin flat
cable
-
1.5m 62-pin cable
-
Terminal board
-
Engraving machine Control
software and Manuals
|
|
Engrve-ESV Control System
|
-
GE-300-SV-PCI-G
Motion control card
-
Connector with a 60-pin flat
cable
-
1.5m 62-pin cable
-
Terminal board
-
Engraving machine Control
software and Manuals
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description
Back to Home